Blogs_Taizhou Huangyan Shunge Machinery Co.,Ltd.-machine,pet machine,deals with machine and mold

Medium and large oil and water bottle blowing machines are ideal for manufacturing different types of bottles that are used for storing and transporting liquids.

2023

04-13

MORE

The use and maintenance of beverage bottle blow molding machine

Beverage bottle blow molding machine is a very important production equipment, because it meets the modern market demand for beverage packaging.

2023

04-13

MORE

Advantages of plastic water bottle blow molding machine

With the development of society, plastic water bottle has become an indispensable item in our life. In order to meet people's needs

2023

04-13

MORE

Automatic blow molding machine supplier introduces the common problems and solutions when the product works

The supplier of automatic blowing machine tells you the solutions to the common problems and failures of automatic blowing machine when blowing bottles. Bursting.

2023

01-17

MORE

The working process of high-speed blow molding machine products

The blow molding process of high-speed blow molding machine products includes: stretching - first blow - second blow,

2022

11-30

MORE

High Speed Blow Molding Machine Product Frequently Asked Questions

High-speed blow molding machine products in the process of blow molding common problems and solutions

2022

11-30

MORE

Specification of operation of blow molding machine

Safety Operation Specification for Automatic Blow Molding Machine (1) Before each shift is started, each moving part must be lubricated once. (Manipulator, manipulator guide rail, opening and closing mold guide rail) (2) The swing arm can be added once (3-4) days. The large chain of the heater and the small chain can be once a month. Always check whether the main engine reducer and heater reducer are short of oil. The main engine bearing can be added once every 3 months. (3) Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially where the impact force is strong, and whether the belt drive part is abnormal. (4) Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal. (5) Check whether the emergency stop switch, safety door switch, and protection device detection switch are normal. (6) Check whether the warming head enters the embryo and whether the embryo part is working normally. If the insertion is not in place, the nut of the embryo pressing device can be adjusted. (7) Check whether the lamp is damaged or broken. It should be replaced in time. (8) Check whether the pneumatic components are leaking and whether the action is sensitive. (9) Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water storage capacity of the water cup is too full. (10) When the solenoid valve of the automatic bottle blowing machine is abnormal, it should be cleaned in time.

2024

10-23

MORE

Factors affecting the process quality of the blow molding machine

The influencing factors affecting the quality of the blowing process are: preform and its heating, pre-blowing (position, pressure and flow)

2024

10-23

MORE

Specification of operation of blow molding machine

Safety Operation Specification for Automatic Blow Molding Machine (1) Before each shift is started, each moving part must be lubricated once. (Manipulator, manipulator guide rail, opening and closing mold guide rail) (2) The swing arm can be added once (3-4) days. The large chain of the heater and the small chain can be once a month. Always check whether the main engine reducer and heater reducer are short of oil. The main engine bearing can be added once every 3 months. (3) Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially where the impact force is strong, and whether the belt drive part is abnormal. (4) Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal. (5) Check whether the emergency stop switch, safety door switch, and protection device detection switch are normal. (6) Check whether the warming head enters the embryo and whether the embryo part is working normally. If the insertion is not in place, the nut of the embryo pressing device can be adjusted. (7) Check whether the lamp is damaged or broken. It should be replaced in time. (8) Check whether the pneumatic components are leaking and whether the action is sensitive. (9) Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water storage capacity of the water cup is too full. (10) When the solenoid valve of the automatic bottle blowing machine is abnormal, it should be cleaned in time.

2024

10-23

MORE

Application of PET packaging bottles

Due to the convenience, safety and flexibility of PET bottles, plastic PET bottles are very popular in the packaging field of many products and have a wide range of applications.

2024

10-23

MORE

BLOGS

COOKIES

COOKIES